48.6 Coupler -Swivel-

This coupler is a trademark product of Heiwa Giken that sells one million units a month.

Type for 48.6
Individual weight 0.7kg
Quantity per case 30

High corrosion resistant plating is also available.

足場用48.6クランプ自在

48.6 Coupler -Right angle-

This coupler is a trademark product of Heiwa Giken that sells one million units a month.

Type for 48.6
Individual weight 0.7kg
Quantity per case 30

足場用48.6クランプ直交

Coupler (Universal type) -Right angle-

Type for 48.6 and 42.7
Individual weight 0.7kg
Quantity per case 30

This product has been approved by SETSCO SERVICES PTE LTD in Singapore. << Download Certifications PDF >>

足場用兼用クランプ直交

Coupler (Universal type) -Swivel-

Type for 48.6 and 42.7
Individual weight 0.7kg
Quantity per case 30

This product has been approved by SETSCO SERVICES PTE LTD in Singapore. << Download Certifications PDF >>

足場用兼用クランプ 自在

42.7 Coupler -Right angle-

This product is mainly used in agricultural applications.

Type for 42.7
Individual weigh 0.67kg
Quantity per case 30

仮設工業会認定品

仮設工業会認定品

42.7クランプ直交足場用

42.7 Coupler -Swivel-

This product is called an agricultural clamp.
As its name suggests, it is often used in agricultural applications (e.g., espalier trellis).

Type for 42.7
Individual weight 0.67kg
Quantity per case 30

仮設工業会認定品

仮設工業会認定品

42.7クランプ自在足場用

Anti-Falling coupler (Universal type)

It is not need to reset the nut owing to the curled top of l-bold.
Reduce the maintenance cost.
Easy to assembly with an electric power tool.

Type for 48.6 and 42.7
Individual weight 0.7kg
Quantity per case 30

ナット抜止め付き兼用クランプ

Triple Coupler -Right angle-

Type for 48.6×48.6×48.6
Individual weight 1.04kg
Quantity per case 20

仮設工業会認定品

仮設工業会認定品

仮設三連クランプ直交

Triple Coupler -Swivel-

Type for 48.6×48.6×48.6
Individual weight 1.04kg
Quantity per case 20

仮設工業会認定品

仮設工業会認定品

仮設三連クランプ自在

60.5x48.6 Coupler – Swivel/Right angle –

Type for Φ60.5×Φ48.6
Quantity per case 25

仮設工業会認定品

仮設工業会認定品

仮設60.5x48.6クランプ直交/自在

Square60 x Φ48.6 Coupler (Universal type) – Swivel/Right angle –

Type Square pipe60×Φ48.6
Universal type is for Φ48.6 and Φ42.7
Quantity per case 20

仮設工業会認定品

仮設工業会認定品

足場用クランプ、60角

Square50 x Φ48.6 Coupler (Universal type) – Swivel/Right angle –

Type Square pipe50×Φ48.6
Universal type is for Φ48.6 and Φ42.7
Quantity per case 25

仮設工業会認定品

仮設工業会認定品

50角x48.6(兼用)クランプ直交/自在

仮設機材50角x48.6(兼用)クランプ直交/自在

Square coupler 60×60 – Swivel/Right angle –

Type for Square pipe 60
Quantity per case Right angle:15
Swivel:20

仮設工業会認定品

仮設工業会認定品

60角x60角 直交/自在

Square coupler 50×50 – Swivel/Right angle –

Type for Square pipe 50
Quantity per case 20

仮設工業会認定品

仮設工業会認定品

50角x50角 直交/自在

50角x50角 直交/自在 仮設機材

Light Coupler -Swivel/Right angle-

Be made of high-strength steel to certify safety and endurance strength.
Shorter operating hours and labor cost due to light weight.
Qualified with Incorporated of scaffolding industy(Japan)

Type for 48.6
Individual weight Swivel:0.62kg
Right angle:0.64kg
Quantity per case 30

Weight per case (30pcs)

Usual Coupler 21.0kg
Light Coupler 18.5kg

ライトクランプ 直交/自在

ライトクランプ 直交/自在 仮設機材

Dimer clamp – Swivel/Right angle –

This a clamp that uses SuperDyma (a pre-plated steel sheet) developed by Nippon Steel & Sumitomo Metal Corporation. Its corrosion resistance, approximately 15 times that of hot-dip galvanization, surely increases the service life of clamps. It is highly rated as a clamp for solar panel bases.

Individual weight 0.7kg
Quantity per case 30

The bolts and rivets are hot-dip galvanized.

仮設工業会認定品

兼用ダイマクランプ 直交/自在

Flange nuts for coupler (width of 7/16)

We provide flange nuts with a width of 7 and 16 inches for clamps.

Note: The sizes are in inches, which are not compatible with sizes in millimeters (M screws).

仮設工業会認定品

クランプ用フランジナット(w7/16)

Hold clamp -Right angle-

This clamp is equipped with a fixing washer at the tip of the tightening bolt, providing stability.

Type for 48.6 and 42.7
Clamp margin 6mm~30mm
Weight 1.02kg
Quantity per case 20

仮設工業会認定品

仮設工業会認定品

ホールドクランプ 直交

Hold clamp -Swivel-

Item Code HCCR-PL
Clamp margin 6mm~30mm
Weight 1.02kg
Quantity per case 20

仮設工業会認定品

仮設工業会認定品

ホールドクランプ 自在

Beam coupler -Swivel/Right angle-

Item Code HCCR
Type for 48.6 and 42.7
Clamp margin 6mm~30mm
Weight 1.0kg
Quantity per case 15

コ型クランプ 固定/自在

Mithty catch

This product alone makes a stationary or universal coupler!
It is best suited for sorting products before shipment or managing yards.
Equipped with a circular washer at the tip of bolt, it is less likely to be loosened by vibrations or other factors.

Item Code HCCR-ML
Type for 48.6 and 42.7
Weight 1.12kg
Quantity per case 20

マイティキャッチ

48.6 Coupler -Right angle-

Type for 48.6
Individual weight 0.7kg
Quantity per case 30

CONCEPT

Through the manufacture and sale of temporary equipment for building and civil engineering,
we have been making efforts to meet the diverse needs of our customers.
Now, we live a new era of technology, where the building techniques are becoming more and more advanced and diversified.
In step with these advanced and diversified techniques,
we are also focusing our efforts on developing higher-quality products and making environmentally-friendly products.
We think about people and the environment to make proposals toward the future.